Revolutionary 100% inspection

The quality specifications for some cutting inserts require 100% inspection. The inspection station RoboInspect 210 measures the geometry of the cutting insert and carries out an all-round inspection to detect chippings, cakings or surface defects; and this down to the µm. The machine may also be equipped with single modules. A retrofit of additional inspection functions is also possible.


Its image processing modules save all inspection results thus allowing for complete traceability.

ROBOWORKER inspection stations are intelligent systems designed for industry 4.0 environments.


Extensions of the inspection station

As an option, the RoboInspect 210 may be extended with an automatic tray stack loading, laser marking or packaging modules. When choosing the stand-alone version, re-palletizing from trays into final packaging boxes can be integrated.

RoboInspect RIS 210 with stacker system


All-round inspection stations with packaging functions

This machine combines an automatic all-round inspection of cutting inserts with packaging modules, such as packing into boxes, lidding and labeling. Upon request a laser marking module may also be integrated.


Measuring and inspecting with RoboInspect RIS 210

Our RoboInspect systems can be used flexibly for automatic measurement/inspection with transmitted and reflected light of

  •    geometries
  •    cutting edges
  •    and surfaces.

The parts can be inspected all round from above and below as well as from the side.

Individual geometry measurement from the top and from the side

  • Incircle and outer circle diameters
  • Cutting edge radii
  • Cutting edge anglers
  • Lenghts, widths and heights
  • Form check

Cutting edge inspection from the top, bottom and from the side

  • Chippings of cutting edges
  • Form deviations
  • Cakings

General surface inspection

  • Local edge chippings in the outer contour area
  • Local surface defects
  • Global colour deviations of the complete part
  • Local coating defects in the edge area
  • Local coating defects on the surface
  • Defects on the lateral area
  • Position deviations of the structures (symmetrie)
  • Type recognition

Weitere Merkmale der Anlagen

  • Prozessstabilität durch wiederholbare und objektive Erkennung der meisten wesentlichen Defekte 
  • verbesserte Teilequalität durch Rückverfolgbarkeit von Fehlern mit detaillierter Dokumentation und gezielten Eingriff in vorgelagerte Prozesse 
  • Reduzierung von Qualitätskosten, die bei Lieferung von fehlerhaften oder vertauschten WSP entstehen können, durch 100%-Prüfung von Chargen
  • Reduzierung von Lohnkosten durch automatisierte Prüfung
  • Einfluss auf den Markenwert durch Auslieferung erstklassiger WSP
  • Einfache Integration in die Produktion durch geringen Platzbedarf